Note that you can use our higher power controllers to charge 12V batteries from a 24V array (SB50 and SB3024), and also 24V batteries from a 48V array (SB3048) in addition to charging 24V/24V, 48V/48V.
The Sun Charger 30 is a 30 amp 12 volt Pulse Width Modulated (PWM) photovoltaic (PV) battery charge controller. The SC30’s sophisticated 3-stage plus equalization charge control system improves battery performance and life while minimizing battery maintenance. The unit is electronically protected against voltage transients, over temperature, over current, short circuit, swapped battery & PV, and reverse battery & PV polarity. A current limit feature minimizes the likelihood of overload by limiting average output current to 30 amps maximum during periods of unusually high PV power production. A very low power LED display is provided to monitor battery voltage and PV charge current. The display system also includes a resettable amp-hour counter which computes total PV amp-hours produced.
Universal Communication Module
For IPNTM Network compatible charge controllers
This manual addendum applies to the Solar Boost 3024i family of charge controllers which have received the DUO-Option upgrade part number Upgrade/3024DUO. This addendum should be used in conjunction with the standard product manuals.
Model CBM4070 Current Booster Module (CBM) is an optically isolated high current MOSFET switch which can be used to greatly increase the load switching capability of Solar Boost charge controllers with load control outputs. In this application the charge controller load control output serves as the input control signal to the CBM and the CBM provides all high current switching for the load. The CBM can also serve as a PWM power driver for the Solar Boost 3024 DUO-Option wind/hydroelectric diversion charge control system.
This Manual includes important Safety Instructions for SB50L, SB50DL and SB50RD25.
This Manual includes important Safety Instructions for SB3048L, SB3058DL and SB50RD25.
The best 25 amp current boosting solar charge controller available. An upgrade of our popular 20 amp Solar Boost 2000, it supports up to 25 amps and includes an equalization function. The technology is “Maximum Power Point Tracking” (MPPT). The Solar Boost 2000 Installation and Operation Manual is also online.
Download this Manual (612 KB)
This Solar Boost MPPT charge controller SB6024HL is specially designed to charge 12V or 24V batteries at up to 60A from a 36V or 48V PV module array. Can also operate with 60V PV input, see Technical bulletin #100210.
Product discontinued in 2010. Replacement product estimated to be available November 2012.