Blue Sky Energy Inc.
1-760-597-1642|Contact Us|
What Product Is Right For You?
Solar Boost 1524iX
12V / 20A or 24V /15 A low cost MPPT charge controller
Patented Maximum Power Point Tracking technology allows Solar Boost 1524iX to increase charge current up to 30% or more compared to conventional charge controllers. Don’t waste your money by throwing PV power away! Get the power you paid for with a Solar Boost charge controller.
Solar Boost 1524iX’s advanced fully automatic 3-stage charge control system will properly charge flooded lead-acid, AGM and Gell batteriesk resulting in improved battery performance with less battery maintenance. The dual 15/20 amp rating will deliver up to 15 amps in 24 volt systems, or up to 20 amps in 12 volt systems. An automatic or manualk equalize function is also provided to periodically condition flooded lead-acid batteries. To further enhance versatility, a user configurable auxiliary output and Blue Sky Energy’s advanced IPNTM network interface are also included.
The user configurable auxiliary output can serve as either a 15/20 amp load controller, or as a 2 amp auxiliary battery charger. The load control feature can be used to limit excessive battery discharge in unattended remote systems, whereas the auxiliary battery charge feature is ideal for charging a separate battery such as the engine start battery in a boat or RV. The auxiliary output can also provide fully adjustable dusk to dawn lighting control.
Blue Sky Energy’s advanced Integrated Power NetTM, or IPN Network, allows up to 8 IPN capable charge controllers to communicate with each other and operate as a single machine rather than separate charge controllers. The IPN network also allows networked controllers to share an optional battery temperature sensor and remote display. The IPN network does not require a display or other special hardware to operate.
Related Documents
Solar Boost 1524iX Datasheet (286 kb)
Solar Boost 1524iX Manual (477 kb)
Related Product Pricing
| Part # | Description | MSRP |
|---|
See all of our product pricing on our pricing page.
Solar Boost 3024iL DUO
Now shipping our SB3024iL DUO
Background:
The Solar Boost 3024i is a 12/24V MPPT type Photovoltaic (PV) battery charge controller. It also includes an auxiliary output which can serve as a 20 amp load controller. The DUO-Option Diversion Control upgrade converts the 3024’s 20 amp auxiliary output into a separate 20 amp diversion type charge controller.
The Diversion Control upgrade allows a 3024 to provide diversion type charge control for hydroelectric, wind or similar generator type power sources while at the same time and within the same unit providing MPPT type PV charge control. The Diversion Control upgrade also allows the 3024 to divert full available PV and generator power which is not required for battery charging to a useful purpose such as heating water.
Download the datasheet below to learn more.
Related Documents
BSE SB3024 DUO-Option datasheet (389 kb)
BSE CBM4070 datasheet.pdf (359 kb)
Solar Boost 3024iL DUO-Option Manual Addendum (216 kb)
CBM4070 Installation and Operation Manual (142 kb)
Related Product Pricing
| Part # | Description | MSRP |
|---|---|---|
| Upgrade/3024DUO | DUO-Option, Software upgrade converts SB3024i(L). Auxiliary output into 20A PWM diversion charge controller | $79 |
| SB3024iL/DUO | SB3024iL with factory installed DUO-Option. ETL/cETL Listed to UL1741, CE Labeled | $448 |
| CBM4070 | Current booster module, 24V 70A DC or 24V 40A 3024 Duo-Option PWM | $99 |
| SB3024DiL/DUO | SB3024DiL with factory installed DUO-Option. ETL/cETL Listed to UL1741, CE Labeled | $518 |
See all of our product pricing on our pricing page.
SB2512i(X) Deluxe wall mount box
SB2512i(X) Deluxe wall mount box - 2.75” (7cm) deep. Black powder coat
Related Documents
Related Product Pricing
| Part # | Description | MSRP |
|---|---|---|
| 930-0039-10 | SB2512i(X) Deluxe wall mount box - 2.75" (7cm) deep. Black powder coat | $35 |
See all of our product pricing on our pricing page.
SB2000E Wall mount box
SB2000E Wall mount box - 2.75” deep. Black powder coat
Related Documents
Related Product Pricing
| Part # | Description | MSRP |
|---|---|---|
| 720-0011-01 | SB2000E Wall mount box - 2.75" deep. Black powder coat | $35 |
See all of our product pricing on our pricing page.
Solar Boost 3024iL & 3024DiL
12V / 24V MPPT charge controller
Patented Maximum Power Point Tracking technology allows Solar Boost 3024iL to increase charge current up to 30% or more compared to conventional charge controllers. Don’t waste your money by throwing PV power away!
Solar Boost 3024iL’s advanced fully automatic 3-stage charge control system will properly charge flooded lead-acid, AGM and GEL batteries resulting in improved battery performance with less maintenance. The dual 30/40 amp rating will deliver at up to 30 amps in 24 volt systems, or up to 40 amps in 12 volt systems. An automatic or manual equalize function is also provided to periodically condition flooded lead-acid batteries. To further enhance versatility, a user configurable auxiliary output and Blue Sky Energy’s advanced IPN™ network interface are also included.
The user configurable auxiliary output can serve as either a 20 amp load controller, or as a 2 amp auxiliary battery charger. The load control feature can be used to limit excessive battery discharge in unattended remote systems, whereas the auxiliary battery charge feature is ideal for charging a separate battery such as the engine battery in an RV. The auxiliary output can also provide fully adjustable dusk to dawn lighting control.
Blue Sky Energy’s advanced Integrated PowerNet™, or IPN Network, allows up to 8 IPN capable charge controllers to communicate with each other and operate as a single machine rather than separate charge controllers. The IPN network also allows networked controllers to share an optional battery temperature sensor and remote display. The IPN network does not require a display or other special communication hardware to operate.
Related Documents
Solar Boost 3024iL & 3024DiL Datasheet (242 kb)
Solar Boost 3024iL Installation and Operation Manual (2.1 MB)
Solar Boost 3024iL DUO-Option Manual Addendum (216 kb)
Solar Boost 3024Di Operation Manual Addendum (237 kb)
Technical Bulletin #100213 (52 kb)
Purpose: Dusk-to-Dawn lighting control provided in software versions V2.00 and later
Related Legacy Documents (products no longer available)
Solar Boost 3024i Installation and Operation Manual (777 kb)
Related Product Pricing
| Part # | Description | MSRP |
|---|---|---|
| IPNPRO-S | IPN-ProRemote display with 500amp shunt. 25' (7.6m) cable included | $249 |
| IPNREM | IPN Remote display. 25' (7.6m) cable included | $99 |
| SB3024PDiL | SB3024i cover with built in digital display | $109 |
| SB3024DiL | SB3024iL with digital display. ETL/cETL Listed to UL17, CE Labeled (Supersedes SB3024Di) | $459 |
| SB3024iL | 40A/12V - 30A/24V MPPT PV charge controller. ETL/cETL Listed to UL1741, (CE Labeled Supersedes SB3024i) | $389 |
| 310-0017-01 | SB3024i power control board & heatsink | $300 |
| 930-0022-20 | Optional battery temperature sensor | $35 |
| Upgrade/3024DUO | DUO-Option, Software upgrade converts SB3024i(L). Auxiliary output into 20A PWM diversion charge controller | $79 |
See all of our product pricing on our pricing page.
Solar Boost 6024HL
12V / 24V 60 amp MPPT charge controller
Patented Maximum Power Point Tracking (MPPT) technology allows Solar Boost 6024H to increase charge current up to 30% or more compared to conventional charge controllers. Don’t waste money by throwing PV power away! Get the power you paid for with a Solar Boost charge controller.
Solar Boost 6024H is specially designed to receive a high voltage 36V or 48V PV array input, and charge a 12V or 24V battery at up to 60A. A high efficiency DC-DC voltage converter combined with MPPT technology allows Solar Boost 6024H to provide a cost effective solution for installations where the PV array must be located far from the batteries and charge controller. High voltage input reduces both wiring expense and wiring power loss.
Solar Boost 6024H also provides an advanced fully automatic three stage charge control system to ensure the battery is properly and fully charged, resulting in enhanced battery performance with less battery maintenance. An equalize function is also included to periodically condition liquid electrolyte lead-acid batteries.
An optional user friendly digital display is available to monitor PV charge performance. Optional temperature compensation of charge voltage is also available to further improve charge control and battery performance
Related Documents
Solar Boost 6024HL Datasheet (363 kb)
Solar Boost 6024HL Installation and Operation Manual (598 kb)
Technical Bulletin #100210 (27 kb)
Purpose: PV module sizing for non-standard voltage modules, or 5 series modules on an SB3048 or SB6024H.
Technical Bulletin #100207 (25 kb)
Purpose: Using the Remote Digital Display connector to obtain current and voltage signals for use with data acquisition systems.
Technical Bulletin #100205 (173 kb)
Purpose: Replacing the main power control circuit board and heatsink assembly
Technical Bulletin #100202 (21 kb)
Purpose: Multi-controller use for large systems
Related Product Pricing
| Part # | Description | MSRP |
|---|---|---|
| SB6024HL | 60A 36V/48V input to 12V/24V output. MPPT PV charge controller. ETL/cETL Listed to UL1741, CE Labeled | $599 |
| SB6024HDL | SB6024HL with digital display. ETL/cETL Listed to UL1741, CE Labeled | $669 |
| SB6024HPDL | SB6024H cover with built in digital display | $129 |
| SB50RD25 | Remote digital display for SB50, 3048 & 6024H. 25' (7.6m) cable included | $129 |
| 310-0015-01 | SB6024H power control board & heatsink | $509 |
| 930-0022-20 | Optional battery temperature sensor | $35 |
See all of our product pricing on our pricing page.
Solar Boost 50 and 3048
SB50 - 12V / 24V 50 amps output
SB3048 - 24V / 48V 30 amp
Patented Maximum Power Point Tracking (MPPT) technology allows Solar Boost 50 and Solar Boost 3048 to increase charge current up to 30% or more compared to conventional charge controllers. Don’t waste money by throwing PV power away! Get the power you paid for with a Solar Boost charge controller.
Solar Boost controllers also provide an advanced fully automatic three stage charge control system to ensure the battery is properly and fully charged, resulting in enhanced battery performance with less battery maintenance. An equalize function is also included to periodically condition liquid electrolyte lead-acid batteries.
An optional user friendly digital display is available to monitor PV charge performance. Optional temperature compensation of charge voltage is also available to further improve charge control and battery performance.
Related Documents
Solar Boost 50 and 3048 Datasheet (456 kb)
Solar Boost 3048L Installation and Operation Manual (595 kb)
Solar Boost 50L Installation and Operation Manual (558 kb)
Technical Bulletin #100210 (27 kb)
Purpose: PV module sizing for non-standard voltage modules, or 5 series modules on an SB3048 or SB6024H.
Technical Bulletin #100207 (25 kb)
Purpose: Using the Remote Digital Display connector to obtain current and voltage signals for use with data acquisition systems.
Technical Bulletin #100205 (173 kb)
Purpose: Replacing the main power control circuit board and heatsink assembly
Technical Bulletin #100202 (21 kb)
Purpose: Multi-controller use for large systems
Related Legacy Documents (products no longer available)
Solar Boost 3048 Installation and Operation Manual (539 kb)
Solar Boost 50 Installation and Operation Manual (521 kb)
Related Product Pricing
| Part # | Description | MSRP |
|---|---|---|
| SB50DL | SB50L with digital display. ETL/cETL Listed to UL1741, CE Labeled | $589 |
| SB50L | 50A 12/24V MPPT PV charge controller. ETL/cETL Listed to UL1741, CE Labeled | $499 |
| SB50PDL | SB50 cover with built in digital display | $129 |
| SB3048DL | SB3048L with digital display. ETL/cETL Listed to UL1741, CE Labeled | $649 |
| SB3048L | 30A 24/48V MPPT PV charge controller. ETL/cETL Listed to UL1741, CE Labeled | $559 |
| SB3048PDL | SB3048 cover with built in digital display | $129 |
| SB50RD25 | Remote digital display for SB50, 3048 & 6024H. 25' (7.6m) cable included | $129 |
| 310-0010-01 | SB50 power control board & heatsink | $409 |
| 310-0013-01 | SB3048 power control board & heatsink | $469 |
| 930-0022-20 | Optional battery temperature sensor | $35 |
See all of our product pricing on our pricing page.
Solar Boost 2512i & 2512iX
12V / 25 amp low cost MPPT charge controller
Patented Maximum Power Point Tracking technology allows Solar Boost 2512i and Solar Boost 2512iX to increase charge current up to 30% or more compared to conventional charge controllers. Don’t waste your money by throwing PV power away! Get the power you paid for with a Solar Boost charge controller.
The low cost Solar Boost 2512i provides an advanced fully automatic 3-stage charge control system to ensure the battery is properly and fully charged, resulting in enhanced battery performance with less maintenance. A partial IPN™ network interface is also included to allow use of the IPN-Remote or IPN-ProRemote displays.
Additional features provided in the Solar Boost 2512iX include automatic or manual equalization, battery temperature sensor input, full IPN network compatibility, and an auxiliary output. The user configurable auxiliary output can serve as either a 25 amp load controller, or as a 2 amp auxiliary battery charger. The load control feature can be used to limit excessive battery discharge in
unattended remote systems, where as the auxiliary battery charge feature is ideal for charging a separate battery such as the engine battery in an RV.
Blue Sky Energy’s advanced Integrated Power Net™, or IPN Network, allows up to 8 IPN capable charge controllers to communicate with each other and operate as a single machine rather than separate charge controllers. The IPN network also allows networked controllers to share an optional battery temperature sensor and remote display. The IPN network does not require a display or other special hardware to operate.
Related Documents
Solar Boost 2512i & 2512iX Datasheet (331 kb)
Solar Boost 2512iX Manual (493 kb)
Technical Bulletin #100213 (52 kb)
Purpose: Dusk-to-Dawn lighting control provided in software versions V2.00 and later
Related Product Pricing
| Part # | Description | MSRP |
|---|---|---|
| SB2512iX | 25A 12V MPPT with full featured IPN interface. Standard wall mount box included | $249 |
| SB2512i | 25A 12V MPPT with IPN display capability. Standard wall mount box included. | $209 |
| IPNPRO | IPN-ProRemote display w/o required shunt. 25' (7.6m) cable included | $209 |
| IPNREM | IPN Remote display. 25' (7.6m) cable included | $99 |
| 930-0022-20 | Optional battery temperature sensor | $35 |
| 930-0039-10 | SB2512i(X) Deluxe wall mount box - 2.75" (7cm) deep. Black powder coat | $35 |
See all of our product pricing on our pricing page.
IPN Remote
The IPN-Remote display provides basic monitoring for Blue Sky Energy’s IPN compatible charge controllers. The unit displays battery voltage, output current and charge control system status for up to 8 charge controllers on a single IPN network. A bright crisp low power LED display is used to provide excellent readability in any lighting. The Charge Status indicator displays present charge control system status, and shows relative battery state of charge. The versatile IPN-Remote shows battery voltage as measured by the charge control system. When the battery is being charged the display toggles between battery voltage and charge controller output current. The current display can be configured to show the total output current from all controllers on the IPN network, or the output current from a particular controller.
Multiple IPN-Remote displays can be placed on a single IPN network even if an IPN-ProRemote is already present.
Related Documents
IPN Remote Datasheet (399 kb)
IPN Remote Installation and Operation Manual (135 kb)
Related Product Pricing
| Part # | Description | MSRP |
|---|---|---|
| IPNREM | IPN Remote display. 25' (7.6m) cable included | $99 |
| REM-ADAPTER | 7.5"x4.6" (19.1x11.7cm) IPN-Remote display adapter. Black panel adapts IPN-Remote to existing large cutout | $29 |
See all of our product pricing on our pricing page.
IPN-ProRemote
The IPN-ProRemote combines full-featured charge controller monitoring and battery system monitoring into a single user friendly remote display. A bright crisp backlit LCD display with plain English language text and three simple front panel keys is extremely easy to use.
With the IPN-ProRemote you no longer have to guess how much battery capacity remains. A high accuracy calculation of remaining battery capacity compensates for a variety of factors including charge/discharge current, battery size, type, temperature and how the battery was brought back to full charge. It even learns from past battery behavior to continuously improve accuracy!
The IPN-ProRemote also monitors and controls BlueSky Energy’s IPN based charge controllers. It can monitor both the combined total and individual status of up to eight IPN charge controllers on a single IPN network. Depending on the particular charge controller model, certain additional parameters or settings can be accessed or modified with the IPN-ProRemote.
By combining an advanced battery system monitor and charge controller display into a single unit, the IPN-Pro Remote eliminates the need for a separate battery monitor. It also simplifies installation and eliminates the headaches of trying to setup and synchronize separate charge controller and battery monitor systems.
Related Documents
IPN-ProRemote Datasheet (421 kb)
IPN Pro Remote Installation and Operation Manual (1.1 MB)
Technical Bulletin #100217 (197 kb)
Purpose: IPN-ProRemote static immunity upgrade kit. Upgrade to Resolve Electrostatic Discharge (ESD) Induced Reset or Lockup
Technical Bulletin #100213 (52 kb)
Purpose: Dusk-to-Dawn lighting control provided in software versions V2.00 and later
Related Product Pricing
| Part # | Description | MSRP |
|---|---|---|
| IPNPRO-S | IPN-ProRemote display with 500amp shunt. 25' (7.6m) cable included | $249 |
| IPNPRO | IPN-ProRemote display w/o required shunt. 25' (7.6m) cable included | $209 |
See all of our product pricing on our pricing page.
Solar Boost 2000E
12V / 25 amp MPPT charge controller
Patented Maximum Power Point Tracking (MPPT) technology allows Solar Boost 2000E to increase charge current up to 30% or more compared to conventional charge controllers. Don’t waste money by throwing PV power away! Get the power you paid for with a Solar Boost charge controller.
The Solar Boost 2000E provides a precision Multi-stage Pulse Width Modulation (PWM) charge control system to ensure the battery is properly and fully charged, resulting in enhanced battery performance with less battery maintenance. An equalize function is also included to periodically condition liquid electrolyte lead-acid batteries.
A built in LCD digital display monitors solar charge performance.The display shows battery voltage, solar panel current and output charge current. You can actually see current boost working by knowing the difference between solar panel current and output charge current. A charge status LED indicates the present charge mode, and shows when the battery has become fully charged.
Related Documents
Solar Boost 2000E Datasheet (156 kb)
Solar Boost 2000E Installation and Operation Manual (447 kb)
Solar Boost 2000 Installation and Operation Manual (488 kb)
Technical Bulletin #100211 (384 kb)
Purpose: Relay clicking due to another charging source on battery.
Technical Bulletin #100203 (148 kb)
Purpose: Obtaining equalization voltage with Solar Boost 2000
Related Product Pricing
| Part # | Description | MSRP |
|---|---|---|
| SB2000E | 25A 12V MPPT PV charge controller | $279 |
| 720-0011-01 | SB2000E Wall mount box - 2.75" deep. Black powder coat | $35 |
| 930-0022-20 | Optional battery temperature sensor | $35 |
See all of our product pricing on our pricing page.
Battery Temperature Sensor
Battery Temperature Sensor Improves Charge Control and Battery Performance.
Applying the proper charge voltage is critical for achieving optimum battery performance and longevity. The ideal charge voltage required by batteries changes with battery temperature.
The battery temperature sensor allows the charge controller to continuously adjust charge voltage based on actual battery temperature.
Temperature compensation of charge voltage assures that the battery receives the proper charge voltage as battery temperature changes during normal operation.
Related Documents
Battery Temperature Sensor Datasheet (282 kb)
Related Product Pricing
| Part # | Description | MSRP |
|---|---|---|
| 930-0022-20 | Optional battery temperature sensor | $35 |
See all of our product pricing on our pricing page.